弥散型核燃料元件热应力的计算模拟

针对弥散型燃料板的具体形状,选择了一种能够反映其实际变形特征的三维代表性体积单元作为研究对象;利用有限元法对其热力耦合行为进行了弹塑性分析,研究了热应力在燃料和基体中的分布特征.     

用迭代法模拟注塑成型的三维流动

Hele-Shaw模型是模拟注塑成型过程的常用模型,它的主要缺点是不能模拟一些重要的物理现象及引入实际制件中并不存在的“中面”概念,为了消除这些不足,本文开发了真三维的流动分析程序。建立了粘性、不可压缩的非牛顿流体流动的控制方程,为了避免同时求解耦合的压力场、速度场,本文引入拟稳定技术独立地求解这些方程,用迭代法求耦合方程的解。这种方法可以减少内存并提高数值方法的稳定性。算例表明数值结果与实验结果吻合较好,这种方法成功地模拟了注塑成型流动过程中的重要特征。     

Plane Problem of Three-Dimensional Stability for a Hinged Plate with Two Symmetric End Cracks

The plane stability problem for a rectangular plate with two symmetric end cracks is solved in three-dimensional formulation. The three-dimensional linearized theory of stability and the finite-difference method are used. The effect of the crack parameter on the critical load is examined__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 4, pp. 47–52, April 2005.     

复杂三维结构物的光弹性实验研究

应用光弹性原理和方法，根据有关相似原理，对研究对象的几何尺寸进行缩比、模型设计及加工成型．然后将模型在危险载荷作用下，进行应力冻结、切片及应力分析．确定了模型不同截面上的应力及其变化规律，为优化设计和调整数值计算方法提供了有价值的依据．     

三维间断位移法及强奇异和超奇异积分的处理方法

从积分方程Somigliana等式出发,导出三维状态下单位位错集度的基本解.在此基础上,建立了边界积分方程,并给出了其离散形式.对强奇异和超奇异积分,采用了Hadamard定义的有限部分积分来处理.最后,给出了计算裂纹应力强度因子的算例,并与解析解进行了比较,证实了该方法的有效性.     

斜拉桥塔锚固区光弹性应力分析与等倾线图像处理

本文采用光弹性冻结应力法，对独塔斜拉桥塔锚固区进行了应力分析，给出了有关截面的边界应力分布及主应力迹线，从而为优化工程设计提供了重要的参考依据。本文还提出了一种新的提取等倾线的方法──图像对数增强相减法，实现了等倾线与等差线条纹的分离，同时使条纹得到了细化，提高了处理等倾线的速度与准确度。编制了自动绘制主应力迹线的程序，利用它绘制了桥塔截面的次主应力迹线。     

Three-dimensional stability of a rectangular plate under uniaxial tension

The paper studies the three-dimensional stability of an isotropic, linear elastic, rectangular plate under a uniform tensile load applied to its sides. The concept of free strains is used to reduce the three-dimensional problem to a two-dimensional one. It is solved using the three-dimensional linearized theory of stability. An approximate solution of the buckling problem is obtained by the finite-difference method. Numerical results are presented __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 116–123, July 2006.     

Calculation of Heavy Gas Spreading Over the Earth Surface by a Three-Dimensional Model

A mathematical model is constructed for motion of a heavy gas along the underlying terrain on the basis of equations of gas dynamics with allowance for the force of gravity, transfer by air masses, and turbulent diffusion. With the use of the method of coarse particles, the time dependences of the coordinates of the fore front, upper boundary, and volume of the cloud of a heavy gas in the presence and absence of wind are analyzed. It is shown that turbulent diffusion leads to a linear increase in cloud volume in time. Three-dimensional shapes of the heavy gas cloud are obtained for various ambient conditions. It is shown that, despite diffusion, the heavy gas spreads predominantly along the underlying terrain.     

Photoelastic model measurement with rotated principal axes by scattered-light photoelasticity

The method of measurement of a three-dimensional photoelastic model with rotated principal axes has not yet been fully experimentally established. It is known that a three-dimensional photoelastic model can be reduced to an optically equivalent model. In this paper, the optically equivalent model is realized from a stratified model consisting of two layers of the frozen stress model. The secondary principal stress direction and the relative phase retardation of the frozen disk model in the stratified frozen stress model are determined for the entire field from Stokes parameters obtained by scattered-light photoelasticity using unpolarized light. The accuracy of these values is confirmed by a comparison with results only from the frozen stress disk model.     

三维复合型断裂的试验方法探讨

探讨了一种能够揭示三维复合型断裂现象并能记录这些现象的三维复合型断裂研究的实验方法，用此方法完成了LC4－CS航空结构铝合金不同厚度紧凑拉伸试样的I＋Ⅱ复合型断裂试验。结果表明：此方法能够简便地确定出复合型裂纹的起裂载荷、破坏载荷、裂尖张开位移、滑移位移和起裂角，基本解决三维复合型断裂研究所需实验数据问题。同时发现此种材料试样的承载能力和超裂方向的确具有明显的厚度效应。